arte di ferro | wrought iron works
HOME | GLASER MACHINES | GATES & FENCES | STAIRCASES | BALCONIES | MISCELLANEOUS | GALLERY | CONTAC US
 

 

Automatic Scroll Bender GSB 8 E

The Automatic Scroll Bender GSB 8 E cold-bends forged scrolls. Pre-cut flat or square iron is the raw material of which the ends are hot-forged first.

The scroll bender consists of two assembly groups:

  • of the well-approved Scroll Bender GSB 8 with an extensive variety of bending tools and special attachments,
  • and of a new-developed support with electrical control.

The Scroll Bender GSB 8 E has been developed for single and mass production in small and medium size enterprises. It is superior especially by its extensive program of bending tools and attachments.

 

Technical Data

Bending capacity: Depending on the applied bending tool, warm-forged flat iron up to 60x12 mm and round and square iron up to 20 mm

Bending speed: 15 rotations/min.

Voltage supply: 380-400 V three-phase current with loadable central conductor (220-230 V), 16 A, 50 Hz or 220-230 V three-phase current, 16 A, 50 Hz

With a power supply in a frequency of 60 Hz the scroll bender runs faster by 20%

Power consumption: ca. 1.25 kW

Paintwork: two-component varnish, blue

Weight: 310 kg

 

 

Scroll Bender GSB 8 K

The Scroll Bender GSB 8 K is a modified manual Scroll Bender GSB 8.

The bending arm is firmly mounted to the Multiple-Purpose Iron Twister GDM. While the manual Scroll Bender GSB 8 has a stationary bending disc, is the Scroll Bender GSB 8 K driven via a bevel gear by the Iron Twister GDM 30, GDM 40/0 or GDM 40/3.

Besides the bevel gear with gear protection the supply comprises the three standard bending tools specified with GSB 8.

The Scroll Bender GSB 8 K can also be used as a manual Scroll Bender GSB 8.

weight: 60 kg

 

 

Automatic Scroll Bender GSB 80-P

The Automatic Scroll Bender GSB 80-P bends forged scrolls in cold condition. Raw material is pre-cut, square or round iron, the ends of which have been hot-forged before.

The Scroll Bender GSB 80-P contains a pole-reversible gear motor with break for two different rotating speeds (12 and 24 rotations/min.).

The Scroll Bender GSB 80-P is equipped with the Glaser-Position Control GPS-2 including a memory for max. 200 locations. Each location memories, besides the starting position of the used bending tool, all angles for a special scroll. First information is the first bending angle of the tool and the corresponding release angle for taking out the scroll. Subsequently it memorizes the data for bending and release angle of the second bending.

 

Technical Data

Bending capacity: Depending on the applied bending tool, warm-forged flat iron up to 60x12 mm and round and square iron up to 20 mm

Bending speed I: 12 rotations/min.

Bending speed II: 24 rotations/min.

Voltage supply: 380-400 V three-phase current with loadable central conductor (220-230 V), 16 A, 50 Hz.

Other voltage and frequency on demand.

Power consumption: 1.9 kW

Paintwork: two-component varnish, blue

Weight: ca. 370 kg

 

 

Automatic Scroll Bender GSB 80-V

The Automatic Scroll Bender GSB 80-V bends forged scrolls in cold condition. Raw material is pre-cut flat, square or round iron, the ends of which have been hot-forged before.

The scroll Bender GSB 80-V is equipped with a modern electronic drive with variable rotating speed, which can be selected between 5 and 45 rotations/min. The bringing-up acceleration and deceleration of the bending tool is perfectly adjusted in our works.

 

Technical Data

Bending capacity: Depending on the applied bending tool, warm-forged flat iron up to 60x12 mm and round and square iron up to 20 mm

Bending speed: 5 to 45 rotations/min.

Voltage supply: 380-400 V three-phase current with loadable central
conductor (220-230 V), 16 A, 50 Hz

Other voltage and frequency on demand.

Power consumption: ca. 1.9 kW

Paintwork: two-component varnish, blue

Weight: ca. 350 kg

Glaser

 

- Air Hammers
- Arch and Ring Bending Machines
- Automatic Scroll Benders
- Driving Machines
- Hydraulic Presses
- Automatic Multiple Iron Twister Machines
- Grinding machines
- Forging Furnaces
- End Mills
- Modify Set Spiral Rolling
- Rolling Devices




If you have any questions about Glaser
machines in the USA please feel free to
contact us: info@ae-artediferro.com

For additional information about Glaser
machines visit www.glaser.de